Kit Stator / Cdi Box / Ignition Coil For Ski-doo Alpine 503 508 Carb F/c 1988

Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988
Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988



Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988


Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988
Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988

Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988

Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988

Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988

Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988




Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988
  
Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988


ATV / UTV / SXS. Brand New Kit Stator + High Performance CDI Box + External Ignition Coil. The Quality exceeds the OEM equipment. All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part. Direct replacement to your original unit.

Plug-and-play, direct fit, easy installation. Highest grade of lamination materials. Highest grade of copper winding, resistant to 200 degrees Celsius. Brand new high performance CDI Box.

Higher grade of electronic components. Brand new external ignition coil. You must re-install your OEM spark plug cap(s). Once your OEM spark plug cap(s) are re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install.

Stator: Dimensions : Interior diameter : 43 mm Exterior diameter : 108 mm Thickness : 18 mm Length of wires : 200 mm Wire to wire resistance : Alternator : Yellow To Yellow/Brown = 0.4 ohms +/-20% Source : Black to Black/Red = 78 ohms +/-20%. High performance CDI Box The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box. Before installing your new stator.


Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier.

Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors. Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. Before installing your new CDI box. Our CDI may use a different wire color code than your original. This CDI is designed as a direct plug-in replacement and should be used as such. Before installing your new external ignition coil. Remove spark plug cap(s) from your OEM external ignition coil. Screw cap(s) on the new external ignition coil. Remove the yellow wire from external the ignition coil, if it is not applicable to your model. More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports.

The item "Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988" is in sale since Tuesday, July 28, 2020. This item is in the category "Automotive\Parts & Accessories\Snowmobile Parts\Electrical Components".

The seller is "rmstator-canada" and is located in Coaticook, QC. This item can be shipped worldwide.
  • Brand: RMSTATOR
  • Manufacturer Part Number: RM22978--S--S
  • Warranty: 2 Year



Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988
  
Kit Stator / CDI Box / Ignition Coil For Ski-Doo Alpine 503 508 Carb F/C 1988