MX5/Miata 1.6 COPs Conversion kit (Wired) PNP NA\MK1. Our Kits are the only on the market that cater for PNP in both wasted and sequential setups. NOTE THIS VERSION OF THE KIT COMES WITHOUT COIL PACKS. FOR VVT SEE OUR R8 KIT. If you are looking at this kit then you probably already know what it is.

Are you building a Turbo or Supercharged MX5, if so then our Coil over plug kit is for you! This kit paired with a standalone ECU like ME221/ME442 or Megasquirt will enable you to run more boost without suffering from spark blow-out which tends to happen on the stock MX5 coil packs. You will also be able to run Sequential fire of the plugs, instead of the wasted spark setup usually ran.

Please see our other kit for 1.6 cars. So what does our kit include. Wired Pig Tails for coil packs. Ground eyelet for valve cover. Unlike most kit's in the UK our's is pre-wired, all you will need to do is supply your own Coil Packs then plug in and go. We do advise you run an aftermarket ECU that is able to run these types of coils, it is possible for the stock ECU to run them but you will need to reduce the dwell time. On aftermarket ECU's be sure to lower your Dwell to 2.5ms at 12v.