Vt Vx Vy Vz Holden Commodore Ls1 5.7lt V8 Aeroflow Ignition Coils & Leads Kit
Submitted by admin on Tue, 08/13/2019 - 23:05
Aeroflow High Performance Ignition Coil Set & Aeroflow 8.5mm High Performance Ignition Leads. Suitable for VT VX VY VZ Holden Commodore & HSV LS1 V8 5.7lt. This Ignition Upgrade Kit is comprised of top quality parts from Aeroflow Performance.
Comprised of an Aeroflow Xpro Xtreme 8.5mm Ignition Lead set and 8 x Aeroflow Xpro High Performance Ignition Coils, this Ignition Upgrade kit is everything your Commodore could ever need. Enjoy the far stronger spark which will aid in delivering a smoother idle, better mid-range power and a flawless engine start, every time. Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability.
Aeroflow Xpro High Performance Ignition Coil Set. Aeroflow now offer a powerful performance upgrade for the LS1 engine. These coils are a direct bolt-in and are engineered with high quality internal materials and components for coils that will produce higher voltage and spark energy. While b ased on the OEM form for ease of installation, these have been engineered with performance improvements in mind! The internal windings and materials are optimized to boost the spark output and efficiency of the coil resulting in increased performance for your engine. Aeroflow Xpro coils will improve the performance of your vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation. No tuning or any other changes are required to fit these coils just bolt on, plug in and drive away! Mounting Bracket Included: No (fits straight to original).
Aeroflow XPro Xtreme Ignition Products 8.5mm High Performance Ignition Leads. The Aeroflow 8.5mm XPro Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference!
In a single 12 inch length of XPro Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, Aeroflow use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core.
So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle.
The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.
Aeroflow's 8.5mm XPro wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot--but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft.
Of tightly wound copper for superior conductivity. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.
Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Supplied complete with clip on numbered lead markers. Spark Plug Boot Ends: Eight multi-angle. Spark Plug Boot Color: Grey.
Spark Plug Boot Material: Silicone. Length: Approximately 8 length end to end.
Low resistance: 40-50 ohms per foot. Direct performance replacement for VT VX VY VZ Holden Commodore & HSV LS1 V8 5.7lt. The item "VT VX VY VZ Holden Commodore LS1 5.7lt V8 Aeroflow Ignition Coils & Leads kit" is in sale since Friday, October 12, 2018. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules, Pickups". The seller is "tuffcarparts" and is located in Moorabbin, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.
- Brand: Aeroflow
- Manufacturer Part Number: AF4020-8262 AF4530-32819
- Warranty: 1 Year