Standard 8 & 10 Lucas Dm2 & 25d Accuspark Distributor & 3 Ohm Red Coil -positive

Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive

Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive

Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive

Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive

Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive

Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive



Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive
  
Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive

Spark T Electronic Distributor to Replace a. DM2 or 25D with Side cap. Standard 8 1954 - 1959. Standard 10 1956 - 1959.

Standard Vanguard 1953 - 1963. 1 Brand new Lucas 25D4 type electronic Distributor Fitted with Stealth electronic ignition module -Positive Earth. Accu SparkT electronic ignition module.
Is a quality item that we have fitted in our own workshops. These give excellent all round performance with notable gains The Hall effect trigger and module give. Positive earth electronic ignition is not compatible with electronic Tachometers. Recently manufactured rotor arms have been failing because the typical "mix" used in the injection moulding nowadays contains more carbon blacking and is therefore more conductive. Still more importantly, the rivet which holds the brass inlay into the moulding is slightly longer than the original, bringing it too close to the spring clip on the underside.

The high tension current, averaging 30,000 volts, is always looking for the easiest route to earth and shorts out from the tip of the overlength rivet, through the reduced thickness of more conductive plastic and the spring clip on the underside of the rotor arm, to earth out down the distributor shaft. Result - no sparks at the plugs.

The situation sometimes rectifies itself on cooling, but then reoccurs with increasing frequency until the rotor permanently short circuits. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances. These LUCAS STYLE RED ROTOR ARMS will not let you down. The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit. The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits. Accu Spark RED High Power 3ohm 12Volt. Suitable replacement for all Standard Non ballast coils.

Ideal for use with points or our electronic ignition kits.

Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive
  
Standard 8 & 10 Lucas DM2 & 25D Accuspark distributor & 3 Ohm red coil -Positive