LS1 LS6 Ignition Coil Harness Set for Relocation Brackets. Included: 2 Stainless steel Brackets, 2. This is a bolt on LS1 coil relocation kit. Consisting of two laser cut cage type brackets that are stainless steel. The brackets can be left as is, polished to a mirror finish, or painted to match your vehicle (please test fit before paint/polish). This kit contains two brackets and enough hardware to do 8 coils or one V8 engine. The hardware consists of four 1/4 through bolts and poly lock nuts, and 12 billet aluminum spacers. We include two relocation bracket Harnesses that give a very clean look. Include two 36 relocation harnesses that allow you to mount the coil pack anywhere you want. These brackets can be mounted on the frame rails, firewall, under the headers on each side, etc.

This kit is known to work with LS1 and LS6 coil part number 12558948 or D580 These coils came factory on most 1997 to 2002 Corvettes, Camaro's, and Firebirds. May work with other coils that have a 65mm spacing as well. This kit will also work on any LS wire harness as long as you use the coils listed above. For example if you have a LQ4 harness it will work as long as you use LS1 Coils.

They will not fit LS2, LS7 (see other listing), or Truck Coils. We Will Only Accept Our Products Which Are Unused, Unwrapped Or Never Installed. The item "Coil Pack Relocation Kit for LS1 LS6 LSX Stainless Steel Brackets & Harness" is in sale since Wednesday, February 14, 2018. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups". The seller is "newgenerationautoparts" and is located in California.