Zeroth Industriez Rb25 (series 2) Vr38/gtr Coilpack Conversion Kit
Submitted by admin on Fri, 12/13/2024 - 03:19
This is a full plug and play VR38/GTR coilpack conversion kit for RB25 SERIES1 (typically found in Nissan Skyline R33 GTST models from 1995 -1998). PLEASE CHECK ALL THE PHOTOS TO ENSURE THAT YOU CHOOSE THE CORRECT KIT.
(THE RB25 S1&S2 VS THE RB25-NEO HEADS HAVE DIFFERENT MOUNTING LOCATIONS FOR THE BRACKET). ALSO BE CAREFUL TO ENSURE THAT YOUR IGNITION LOOM HAS THE CORRECT CONNECTOR FOR THE KIT YOU CHOOSE.
IT IS POSSIBLE THAT YOU HAVE A EARLIER/LATER ENGINE VARIANT IN A LATER/EARLIER MODEL CAR. IF YOU ARE STILL UNSURE PLEASE DON'T HESITATE TO GET IN TOUCH AND DOUBLE CHECK. Included in this kit are the following components. 6x Genuine Nissan 22448-JF00B coils.
Zeroth Industriez RB-GTR Coil mounting bracket and all required hardware. Zeroth Industriez-X-DZRWIRE ignition wiring loom.
It is possible to fit these coils under a standard J-pipe. DOES NOT allow for fitment of OEM valley cover. WE WOULD ALWAYS RECCOMMEND FINE TUNING YOUR DWELL SETTINGS FOR OPTIMUM PERFORMANCE & RELIABILITY. The loom is designed to completely bypass the OEM igniter (igniter is no longer required an these coils have built igniters).
Zeroth Industriez only supply Nissan Hanshin 22448-JF00B ignition coils as they are tried, tested, and trusted. Be cautious of other sellers that state "GTR style" or "equivalent" coils, as these will be cheaply made, weak, and unreliable. Coils may be removed from their boxes for packaging purposes (although original boxes will be flattened and included).