Kit Stator 100w Hp Cdi Ignition Coil Flywheel Puller For Yfz 350 Banshee 1996

Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996

Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996
Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996



Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996

Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996

Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996


Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996

Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996



Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996



Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996  Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996

ATV / UTV / SXS. Brand new kit stator + high performance CDI box + external ignition coil + flywheel + puller. The quality exceeds OEM equipment. Direct replacement to your original unit.

Plug-and-play, direct fit, easy installation. Brand New Kit Stator + High Performance CDI Box + External Ignition Coil + Flywheel + Puller.

All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part. Highest grade of lamination materials. Highest grade of copper winding, resistant to 200 degrees Celsius.

Adjustable timing plate to advance and retard up to 10 degrees included. Enhanced timing curve, increased rev limiter (approximately 1000 rpm). Higher grade of electronic components. Flywheel: RMSTATOR is offering a new replacement flywheel with stronger magnets for your Banshee, this flywheel can be used as a direct replacement to the OEM. We suggest combining it to our 100 or 200 watt stator as it will run the lights better in the lower rpm's. Spark plug cap(s) included. Before installing your new stator/flywheel. Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier.

Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors. Our stator may use a different wire color code than your original.

All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound. CDI Box HP Our CDI may use a different wire color code than your original. This CDI is designed as a direct plug-in replacement and should be used as such.

Before attempting to start your banshee adjusting the air gap is necessary. Remove the yellow wire from the external ignition coil, if it is not applicable to your model.

More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports. This item is in the category "Automotive\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Electrical Components". The seller is "rmstator-canada" and is located in this country: CA. This item can be shipped worldwide.

  • Brand: RMSTATOR
  • Manufacturer Part Number: RM22853--A--Y
  • Surface Finish: Metal
  • Warranty: 2 Year


Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996  Kit Stator 100W HP CDI Ignition Coil Flywheel Puller For YFZ 350 Banshee 1996